Гумени вериги 400x73x76KU ITR

🔧 Гумена верига за мини багер 400x73x76KU

Catalog: RT4007376KU

Manufacturer: ITR

Гумени вериги 400x73x76KU са предназначени за мини багери и компактна верижна техника, in which the undercarriage uses size 400 mm width, 73 mm step, 76 unit and KU profile. Гумените вериги 400x73x76KU ITR са подходящи за Yanmar VIO55-6B, when the machine uses this exact size and corresponding KU profile.

This size is part of the series 400×73 and should not be confused with the series 400×72.5. The difference between 73 mm And 72.5 mm looks small, но е важна за правилното зацепване със звездочката и воденето на веригата. The size 400x73x76KU should not be replaced by 400×72.5x76KU, 400×72.5x76W, 400x73x76 без KU профил или друг близък вариант без проверка по старата верига.

📐 Dimensions

🔁 Alternative sizes and chains

The size 400x73x76KU should only be replaced with the same size: 400 mm width, 73 mm step, 76 unit and KU profile. It is not recommended to use close sizes such as 400×72.5x76KU, 400×72.5x76W, 400x73x76, 400x73x76W, 400x73x74KU or 400x73x78KU without checking on the old circuit.

In some catalogs, the size may be written as 400x73x76KU, 400X73X76KU, 400-73-76KU, 400/73/76KU, 400x73KUx76, 400x76x73KU or 400/76/73KU. The meaning remains: width 400 mm, step 73 mm, 76 unit and KU profile.

The designation KU not to be missed. It can mean a specific internal profile, a different driver configuration or a special variant of driving compared to standard, KB, N, W or K version. Therefore, this size should not be replaced by another profile variant without physical verification on the old circuit.

With this item, it is especially important not to get confused 400x73x76KU with 400×72.5x76KU. Двата размера са близки като ширина и брой звена, но стъпката е различна. Грешна стъпка или различен профил може да доведе до неправилно зацепване, bad driving, accelerated wear or inability to install.

Before ordering it is important to compare the inscription on the old chain, the width, the step, the number of units, the inner guide, The KU profile, The OEM number and model/serial number of the machine. If the size, profile or number of units do not match, the chain may not seat properly on the undercarriage.

⚙️ Compatibility and purpose

Допълнителна бележка за съвместимост: за базов размер 400x73x76 се срещат още Gehl Z45, Gehl Z55, Yanmar VIO45-6A, Yanmar VIO50-6A и Yanmar VIO55-6A, но при тях трябва да се потвърди дали старата верига е именно 400x73x76KU, а не стандартна 400x73x76 без KU индекс.

📞 Contact us

Ако търсите гумени вериги 400x73x76KU, undercarriage spare parts or assistance in choosing the right size rubber tracks according to the model, profile and machine serial number, Do not hesitate to contact us. Send us an inquiry or call us directly, to get an accurate quote, quick availability check and professional help in choosing the right chain. We will help you compare the size, KU profile, the step 73 mm, the number of units, OEM number and application, to avoid a wrong order and get a reliable solution for your machine.