Rubber tracks 400x142x37K ITR

🔧 Гумена верига за мини багер 400x142x37K

Catalog: RT40014237K

Manufacturer: ITR

Гумени вериги 400x142x37K са предназначени за мини багери и компактна верижна техника, in which the undercarriage uses size 400 mm width, 142 mm step, 37 units and K profile. Гумените вериги 400x142x37K ITR са подходящи за модели като Komatsu PC40.7, Komatsu PC45, Komatsu PC50, Airman AX45, Case CK50, Caterpillar 304, Hitachi ZX50U, IHI IS45, Kubota KX151, Mitsubishi MX45, Takeuchi TB55R и Volvo ECR48C, when the machine uses this exact size and corresponding K profile.

This size is part of the series 400×142 и е long-pitch вариант с голяма стъпка 142 mm. The designation K is important and should not be missed. The size 400x142x37K not to be confused with standard 400x142x37, with 400x142x37N, with 400x142x36K, with 400x142x36W or with sizes from the series 400×107. The step 142 mm, the number of 37 units and the K profile must match the old circuit exactly, to have proper guidance on the sprocket, the rollers and the sloth.

📐 Dimensions

🔁 Alternative sizes and chains

The size 400x142x37K should only be replaced with the same size: 400 mm width, 142 mm step, 37 units and K profile. It is not recommended to use close sizes such as 400x142x37N, 400x142x37, 400x142x36K, 400x142x36W, 400x142x38K, 400x107x46K or 400x100x50, without checking on the old circuit.

In some catalogs, the size may be written as 400x142x37K, 400X142X37K, 400-142-37K, 400/142/37K, 400x142Kx37, 400x37x142K or 400/37/142K. The meaning remains: width 400 mm, step 142 mm, 37 units and K profile.

The letter K not to be missed. It can mean a different internal profile, different guide configuration or specific chain guide than standard, N, W or Y version. Therefore, this size should not be replaced by another profile variant without physical verification on the old circuit.

With this item, it is especially important not to get confused 400x142x37K with 400x142x37N. Both sizes are the same width, pitch and number of units, but the profile index is different. An incorrect profile can lead to bad leads, incorrect engagement with the sprocket, accelerated wear or inability to install.

Before ordering it is important to compare the inscription on the old chain, the width, the step, the number of units, the inner guide, The K profile, The OEM number and model/serial number of the machine. If the size, profile or number of units do not match, the chain may not seat properly on the undercarriage.

⚙️ Compatibility and purpose

📞 Contact us

Ако търсите гумени вериги 400x142x37K, undercarriage spare parts or assistance in choosing the right size rubber tracks according to the model, profile and machine serial number, Do not hesitate to contact us. Send us an inquiry or call us directly, to get an accurate quote, quick availability check and professional help in choosing the right chain. We will help you compare the size, K profile, the step 142 mm, the number of units, OEM number and application, to avoid a wrong order and get a reliable solution for your machine.