Гумени вериги 350x55x88K ITR | RT3505588K

🔧 Гумена верига за мини багер 350x55x88K

Catalog: RT3505588K

Manufacturer: ITR

Гумени вериги 350x55x88K са предназначени за машини, при които ходовата част използва точен размер 350 mm width, 55 mm step, 88 units and K profile. Артикулът RT3505588K е K профилен вариант и не трябва да се приема автоматично за същия като стандартна 350x55x88 или 350x55x88N.

This size is part of the series 350×55, but the presence of K profile is important and should not be missed. The size 350x55x88K not to be confused with 350x55x88N, 350x55x88, 350×54.5x86K, 350×52.5x88W или други близки размери от серията 350 mm. The step 55 mm, the number of 88 units and the K profile must match the old circuit exactly, to have proper guidance on the sprocket, the rollers and the sloth.

📐 Dimensions

🔁 Alternative sizes and chains

The size 350x55x88K should only be replaced with the same size: 350 mm width, 55 mm step, 88 units and K profile. It is not recommended to use close sizes such as 350x55x88N, 350x55x88, 350x55x86K, 350x55x90K, 350×52.5x88W, 350×52.5x88N or the standard option is the K profile, without checking on the old circuit.

In some catalogs, the size may be written as 350x55x88K, 350X55X88K, 350-55-88K, 350/55/88K, 350x55Kx88, 350x88x55K or 350/88/55K. The meaning remains: width 350 mm, step 55 mm, 88 units and K profile.

The letter K not to be missed. It can mean a different internal profile, different guide configuration or specific chain guide than standard, N, W or Y version. Therefore, this size should not be replaced by another profile variant without physical verification on the old circuit.

With this item, it is especially important not to get confused 350x55x88K with 350x55x88N. Both sizes are the same width, pitch and number of units, but the profile index is different. An incorrect profile can lead to bad leads, incorrect engagement, accelerated wear or inability to install.

Before ordering it is important to compare the inscription on the old chain, the width, the step, the number of units, the inner guide, The K profile, The OEM number and model/serial number of the machine. If the size, profile or number of units do not match, the chain may not seat properly on the undercarriage.

⚙️ Compatibility and purpose

📞 Contact us

Ако търсите гумени вериги 350x55x88K, undercarriage spare parts or assistance in choosing the right size rubber tracks according to the model, profile and machine serial number, Do not hesitate to contact us. Send us an inquiry or call us directly, to get an accurate quote, quick availability check and professional help in choosing the right chain. We will help you compare the size, K profile, the step 55 mm, OEM number and application, to avoid a wrong order and get a reliable solution for your machine.